Impermeabilización

ACRYLIC RUBBER

Cod. 7017


Water-based elastic coating, indicated for the waterproofing of concrete, tiled, decked and cantilever surfaces.
Colour: 
Grey, red, white, russet and green.

15 Lts

4 Lts

Dilution: 
Water 0-5%
Drying time to touch: 
6 hours at 20ºC
Application tools: 
Brush
Airless Pistol
Roller
Repainting: 
24 hours at 20ºC
Yield: 
1,6 l/m2 with 3 coatings
Data sheet: 
Water-based aliphatic and elastic continuous polyurethane membrane with considerable waterproofing power. Fully trafficable. Adheres to all types of surfaces, including glazed surfaces with the addition of the adhesion enhancer. Serves as a high-quality elastomer coating for facades.
Colour: 
Colourless
Nuevo

Nuevo

15 Lts

4 Lts

Dilution: 
No dilut. Water
Drying time to touch: 
1 hour at 20ºC
Application tools: 
Brush
Roller
Repainting: 
Min: 4 hours at 20ºC
Yield: 
1 l/m2 3 coatings
IInvisible damp-proofer and water repellent, for exposed brick and natural stone surfaces, provides water resistance without affecting its natural appearance. VERY IMPORTANT! Apply a single coat until reaching saturation.
Colour: 
Colourless

0,75 Lts

15 Lts

4 Lts

Dilution: 
-
Drying time to touch: 
1 hour at 20ºC
Application tools: 
Brosse
Spray sans air
Rouleau
Repainting: 
No
Yield: 
10 m²/l depending on the surface
Data sheet: 
1-component elastic polyurethane coating with high impermeability for concrete and tiled surfaces.
Colour: 
Grey and Red
10 años de garantía

10 años de garantía

Multi adherente

Multi adherente

25 Kgs

6 Kgs

Dilution: 
Ferrodesmo Thinner
Drying time to touch: 
3 hours at 20ºC
Application tools: 
Brush
Roller
Repainting: 
Min.:24h Max.: 7 days
Yield: 
2 Kg/m2 with 3 coatings
Data sheet: 
Accelerative additive for the FERRODESMO polyurethane membrane. Prevents the formation of bubbles and increases the thixotropy of the membrane. Mix 1.5 L with 25 Kg of FERRODESMO.

1,5 Lts

Drying time to touch: 
Drying time to touch: Reduces drying time to as little as 4 hours.
Continuous membrane which incorporates polyurethanes in its composition, with excellent mechanical properties, can be applied to concrete surfaces, tiles, roofing, etc., giving them a high level of water resistance. High resistance to ageing and cracking. Available in D and TR base
Colour: 
Grey, red, white, russet, black and green. D and TR Bases
Aislante de temperatura

Aislante de temperatura

Multi adherente

Multi adherente

No inflamable

No inflamable

Resistente al moho y al verdín

Resistente al moho y al verdín

0,75 Lts

15 Lts

4 Lts

Dilution: 
Water .0-5%
Drying time to touch: 
6 hours at 20º
Application tools: 
Airless Pistol
Brush
Roller
Repainting: 
24h at 20º
Yield: 
1,6 l/m2 3 coatings
Data sheet: 
Continuous elastic waterproof membrane which incorporates polyurethanes in its composition and which includes hollow sphere micro-pigments that give the product thermal, insulating and soundproofing properties. Its composition makes it especially resistant to mould. High adhesion.
Colour: 
White
Aislante de temperatura

Aislante de temperatura

Multi adherente

Multi adherente

No inflamable

No inflamable

15 Lts

Dilution: 
Water
Drying time to touch: 
1 hour at 20ºC
Application tools: 
Airless Pistol
Brush
Roller
Repainting: 
24 hours at 20ºC
Yield: 
2 - 3 l/m2 per coat

FERRODESMO VARNISH

Cod. 7013


1-component elastic aliphatic polyurethane varnish, highly resistant to the outdoors. Ideal as a top coat sealant for FERRODESMO to stop dirt getting into the membrane and to add shine.
Colour: 
Colourless

4 Kgs

Dilution: 
Do not dilute. Ferrodesmo thinner
Drying time to touch: 
6 hours at 20ºC
Application tools: 
Brush
Roller
Repainting: 
Min.:24h Max.: 7 days
Yield: 
6 m2/l per coat
Elastomeric primer for surfaces with poor adhesion. Serves as a bonding interface in waterproofing processes. Can be used on both vertical and horizontal surfaces.
Colour: 
Colourless
Multi adherente

Multi adherente

No inflamable

No inflamable

Nuevo

Nuevo

15 Lts

4 Lts

Dilution: 
Water, 1ª y 2ª coatings 0-5%
Drying time to touch: 
6 hours at 20ºC
Application tools: 
Airless Pistol
Brush
Roller
Repainting: 
Min: 24 hours at 20ºC
Yield: 
3-4 m²/litre depending on porosity
Data sheet: 
Water-based elastic coating, reinforced with fibre, indicated for the waterproofing of concrete surfaces, tiles, roofs and cantilevers.
Colour: 
Grey, red, white, russet and green.
Aislante de temperatura

Aislante de temperatura

No inflamable

No inflamable

15 Lts

4 Lts

Dilution: 
Water 0-5%
Drying time to touch: 
6 hours at 20ºC
Application tools: 
Airless Pistol
Brush
Roller
Repainting: 
24 hours at 20ºC
Yield: 
1,6 l/m2 with 3 coatings

Pages